Clutch Kit 3400700620 for Sachs Cross-Reference Trucks

OEM-specification clutch kit 3400700620, supplied as a matched cover + disc set for Sachs cross-reference heavy-duty trucks at 395 × 230 × 410 mm (cover) / 395 × 230 × 10T × 44.5 mm spline (disc). Eliminates the trial-and-error of replacing one side only: cover and disc are pre-balanced as a pair, fitted together at the factory and shipped as a single part number. Cast iron cover housing with heat-treated diaphragm spring, organic disc facing on sprung hub. Supplied factory-direct from an IATF 16949 certified plant in Jiangxi, China.

Product Parameter

Installation & Maintenance Tips

1. Install as a matched pair. A clutch kit is supplied as a tuned cover + disc set — do not split it or mix with existing parts.
2. Confirm bearing inclusion. Bearing-equipped and bare-shaft kits have different part numbers — specify when ordering.
3. Centre the disc before the gearbox goes back in. Use an alignment tool to keep the disc hub concentric with the crankshaft, otherwise the input shaft will not engage.
4. Inspect the flywheel. Hot-spots, glazing or runout beyond 0.10 mm shorten kit life dramatically. Skim or replace the flywheel if needed before fitting the new kit.
5. Break-in. For the first 500 km, avoid riding the clutch, prolonged slip on hills and high-load dragging in upper gears.

General guidance for heavy-duty truck clutch components. Always refer to the vehicle manufacturer’s workshop manual for model-specific torque values, runout limits and break-in procedures.

Product Features

• Matched cover + disc — cover diaphragm spring and disc friction spec are matched to OE torque capacity, no mix-and-fit risk.
• Drop-in replacement — supplied as a paired set, eliminates the trial-and-error of replacing one side only.
• Pre-balanced as a pair — cover and disc balanced together for smoother engagement than separate aftermarket parts.
• Single part number, single shipment — reduces procurement admin and freight cost vs. ordering cover and disc separately.

Application

Built for heavy-duty commercial vehicles: long-haul logistics, mining transportation, construction sites and port container shuttle. Matched to Sachs cross-reference truck series at 395 × 230 × 410 mm (cover) / 395 × 230 × 10T × 44.5 mm spline (disc).

Factory Strength

• IATF 16949 certified plant — quality management system certified for automotive clutch component production.
• In-house tooling — own mold workshop, machining workshop and assembly line; new tooling developed from samples or drawings.
• OE number matching — technical team cross-checks your part number against our catalogue before quotation.
• Inspection before every shipment — 100% dimensional and visual check, with batch sampling for fatigue testing. Test reports available on request.
• Factory-direct supply — stable lead time, no trading margin. About our factory

Packing & Shipping

FAQ

Q1. Does this complete clutch kit fit if my part number is different?

A. Send us your original part number, a photo of the label, or your VIN — our technical team cross-checks it against our catalogue and confirms fitment before you order.

Q2. Why do you buy from us instead of other suppliers?

A. Mark Clutch products are manufactured under strictly guaranteed production processes, with full control over every working procedure. We ensure every finished part is qualified and matches OE part numbers for original truck components. We develop overseas markets with high cost-performance.

Q3. What is your MOQ and lead time?

A. MOQ is 50 pcs. Samples ship in 3–7 days, bulk orders in 15–30 days depending on quantity.

Q4. How is quality verified, and what does the warranty cover?

A. Every unit is dimensionally and visually inspected, and each batch is sampled for fatigue testing; test reports are available on request. Warranty is 1 year or 100000KM, covering manufacturing defects under normal use.

Q5. Can you put our brand and part number on the product and packaging?

A. Yes. Neutral packing as standard and customised branding available on request. We also develop new tooling from your samples or drawings. Contact us about OEM service.

Q6. What else do you supply?

A. Clutch cover assemblies, clutch disc assemblies, flywheels, brake pads and related components for European, Russian and South American truck fleets.

Related Products

• More clutch kits by size and OE number
• Clutch cover assemblies
• Clutch disc assemblies
• Complete clutch kits